UPVC Replacement Door Handles
As time passes the handles on your doors will wear down and will require replacement. In this case, it is essential that the new handles match the exact dimensions of the handle that was previously used.
The top screw's position as well as the lever and keyhole sizes are the three measurements that you need to check. Use the size guide to help with this.
Inline Lever/Lever
A lever door handle is a modern handle that can be put in on new or replacement doors. This style door handle is offered in a variety of styles and finishes. A number of manufacturers offer this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite handles are made from durable materials, and are perfect for doors with multiple points that require a robust design. The handles are inline and run off the same spindle and screw fixings so they are easily installed on new or existing uPVC/Composite doors.
The sprung lever design allows the handle to be positioned and angled to ensure a comfortable experience and is suitable for all users. The handle has been endurance tested to 200,000 cycles, which helps to ensure the quality of the finish as well as the performance of the handle over time. The sprung lever is also adjustable to fit a broad range of locks. This is particularly beneficial in doors with smaller door frames where the cylinder is further back. A lever that is shorter is an ideal choice for doors where the latch can be opened by a thumb turn located on the inside.
Lever Pad
A Lever Pad door handle made of upvc operates differently to the lever type handles found on most doors. These handles can use a single spindle (inline) or independently from each side by using two offset or inline spindles (pad). They are commonly employed on UPVC doors with double glazing and come in a variety of finishes and variations.
The handles have been tested to the minimum of 200 000 cycles and are available in a variety of finishes like White, Silver, Chrome & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high degree of durability and performance for its intended use.
All of the UPVC lever pad designs are supplied with the spindle and screws that allow them to be fitted on an existing or new uPVC door. The backplate fixation centers of 211mm permit a larger handle, which is often a benefit when replacing an old or faulty multi-point door lock mechanism. The handle levers come with springs, which eliminate the issue of door handles that sag out of horizontal position when not in use.
When choosing a replacement UPVC handle and spindle, it is crucial to match the dimensions of the PZ on both the multipoint lock and the uPVC door. This measurement is also referred to as 'handle centres' or cylinder centres'. It is important for matching the correct handles.
When you have the right PZ size, you'll need to ensure that the handle lever pads and push pads are a suitable shape for the American with Disabilities Act (ADA) compatible handles you require for your doors. These are typically a square or round shape with an internal lever and an external push pad.
Most of the UPVC lever pads we offer are sprung, which means that they will return to their horizontal position after not in use, instead of hanging out and possibly sticking in the frame. This stops draughts and cold air from entering a home. The majority of UPVC lever pad handles come in both left and right handed versions, allowing them to be placed on either side of doors.
Euro Cylinder
Cylinder locks are usually used on uPVC doors, but can also be used on other types of door. The cylinder lock is operated by a key which unlocks the cylinder case. The case is then able to reveal pins that can be aligned with the pins in the lock, and permit them to rotate the revolving camera, opening the door. Euro Cylinders are available with up to six pins. Doors that are internal and external require different levels of security.
Choosing the right cylinder is crucial; it is contingent on the way your door and handle are used. For upvc door handles Repair My Windows And Doors , exterior doors should be fitted with a higher security cylinder, while doors inside can be secured with the standard cylinder. In addition, some cylinders come with additional features that increase security, for instance anti-drill and anti-bump characteristics.
To make sure that the euro cylinder is the right size for your door, it should be measured correctly. The cylinder should be measured from the central fixing screw hole to each end of the cylinder and the thumb turn if you have one. If you cannot measure with the lock in position, you can remove it. A cylinder that extends beyond the handle and escutcheon could be vulnerable to attacks such as snapping locks, so it is essential to make sure it's not too long.
Most newer cylinders have been made with anti-drill and bump resistance features built into their design. They are designed to decrease the chance of a attack by forcing the cylinder rotate in an opposite direction. This can help prevent attacks and ensure your doors are secure.
There are also cylinders constructed to resist snapping. This is a common occurrence on cylinders. A specially designed tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a faster and simpler method to gain access than using a multipoint locking system. It also leaves less evidence of the break-in which could make it difficult to prove insurance claims.
Spring Cassette
This spring cassette is located inside the base plate of the door handle. It offers a spring-loaded solution to return the multipoint lock handles to their resting position after use. The handles were previously equipped with no spring and would drop when the locking mechanism was disengaged. This simple part is the best solution to solve this issue. It also prevents your door from becoming stuck in the closed or open position as they are difficult to close manually.
These spring cassettes are specifically designed for use with sprung multipoint locks They will not work with unsprung multipoint handles and you will need to have a hole specifically cut in the backplate to allow them to fit (please check the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the backplate of the door handle for many brands of uPVC doors. They feature a square cut out which allows for an 8mm spindle to be used and they are supplied individually.
These spring cassettes are an excellent cost-effective way to fix the problem of handles on your doors sagging. They are easy to fit and will prolong the lifespan of your uPVC doors. For more information about our selection of uPVC spares and accessories contact us today. in touch with our team. We are always happy to provide professional advice and assistance you.